2006 Larsen & D'Amico 42 in x 12 ft horizontal 3-phase separator package, MAWP 1,440 psig at 130 °F, CRN L8586.213, housed with fuel gas scrubber and 4 in meter run.

2006 horizontal 3-phase separator package with a vessel built by Larsen & D'Amico Mfg. Ltd. and packaged by Argo Sales Ltd., rated 1,440 psig at 130 °F. The 42 in x 12 ft vessel sits in a metal-clad building with its fuel gas scrubber, 4 in meter run, relief valve and controls, set up as a complete high-pressure inlet separation and measurement package. It is ASME U-stamped and registered in Alberta (CRN L8586.213).

Key Specs

- Type: horizontal 3-phase inlet separator, housed package

- Size: 42 in x 12 ft

- Year built: 2006

- MAWP: 1,440 psig at 130 °F (9,928 kPag at 54 °C)

- MDMT: -22 °C (-8 °F) at 9,928 kPag

- Shell thickness: 1.750 in

- Head thickness: 1.6875 in

- Corrosion allowance: 0.125 in

- Service: listed as sour

Nameplate / Registration

- Fabricator: Larsen & D'Amico Mfg. Ltd., Edmonton, AB

- Code stamp: ASME U, W, HT, RT 1

- CRN: L8586.213 (ABSA directory: base design L8586.2, Larsen & D'Amico, vessel, drawing LD-3911-A1/A2)

- A number: 549044

- Serial: HS-13256

- Fuel gas scrubber: Larsen & D'Amico, MAWP 150 psi at 200 °F, MDMT -20 °F at 150 psi, corrosion allowance 0.0625 in, CRN L9476.213

Condition

- Rated B (used, good condition)

- Connection status: disconnected

What's Included

- Separator vessel with relief valve, level controls and control valves

- Fuel gas scrubber

- Meter run by Miquelon Meter Services: 4 in Sch 80, AGA 3C, max orifice 2.625 in, S/N MM2709 (02/2006)

- Chart recorder

- Metal-clad building with door, window and skid

Photos & Documents

- 9 photos: building exterior, vessel and piping inside the building, separator and scrubber nameplates, meter run tag

- No documents posted

Verification Recommendations

- Confirm sour-service design (NACE MR0175 / ISO 15156 materials); hazard labels on the vessel read natural gas (sweet) and produced water (sweet)

- Confirm 3-phase internals; the nameplate reads horizontal inlet separator

- Request the U-1A data report and the latest inspection record

- Confirm building dimensions and shipping weight

- Confirm registration for the destination province if outside Alberta