New 2025 Bilton 96" ID x 10' S/S 100 bbl single-wall flare knockout drum, ASME VIII-1, CRN V8688.2, 50 psig MAWP @ 100°F, MDMT -20°F, NACE MR0175 wetted parts, internally lined (Devoe 253), spray-foam insulated, skidded with heated end enclosure. Multiple identical units. Red Deer, AB.

96" ID x 10'-0" S/S, 100 bbl Single-Wall Flare Knockout Drum – Bilton, New (Never Installed), Multiple Identical Units

VESSEL (per Bilton as-built design drawings and nameplate)

- Manufacturer: Bilton Welding & Manufacturing Ltd. (Innisfail, AB)

- Code: ASME Section VIII, Div. 1, 2023 edition; Alberta registration; CRN V8688.2

- Size: 96" ID x 10'-0" S/S, horizontal; nominal capacity 100 bbl; volume 640 ft³ (18.12 m³)

- Design / MAWP: 50 psig @ 100°F; MDMT: -20°F @ 50 psig; hydrostatic test: 75 psig (1 hr hold)

- Shell 0.375" and heads 0.313" min., SA-516-70N; flanges SA-105N; pipe SA-106B; bolting B7M/2HM; corrosion allowance 1/8"

- Select chemistry: NACE MR0175/ISO 15156 for wetted parts (max carbon 0.23%, max CE 0.43%)

- Weights: 10,500 lb empty; 41,500 lb full of water

- Built 2025 (nameplate and as-built drawings dated April 2025)

COATINGS & INSULATION

- Internal lining: SSPC-SP5 blast, two coats Devoe 253 (or Phenoline 353), 5–8 mils

- External: Carboguard 8922 primer and Carbothane 8845 topcoat on uninsulated areas

- Vessel: 2" spray-foam insulation with fire-resistant latex topcoat; 2" spray foam under skid

- Heater enclosure: 1-1/2" rigid urethane with stucco-embossed aluminum cladding

CONNECTIONS & EQUIPMENT (per as-built drawings)

- M1 manway: 24" CL150 RF with blind

- N3/N4: 4" CL150 RF blinds

- N5 truck-out: 3" CL150 RF with 3" full-port ball valve and 3" camlock with dust cap

- N7 level gauge: 4" CL150 RF tapped 1" NPT, with TGS-5020 sealed sour-service level gauge

- 1" CL3000 threaded drain piping with ball valve and orifice union

- Heater: 12" x 24" catalytic heater (12 V, natural gas) with thermostat, safety shut-off valve, appliance regulator and Fisher 912 regulator, 24" vent hood

- Skid-mounted on saddles; approx. shipping dimensions 9'-8" W x 11'-2" H x 16'-10" L; approx. shipping weight 10,500 lb

CONDITION & STATUS

- New, unpackaged (PASC A); never installed; ready for load-out in Red Deer, AB

- Multiple identical units available (see quantity on listing)

- Documents available: as-built general notes / design specifications and final assembly drawings

BUYER NOTES

- Inlet/outlet nozzle sizes are not shown on the public drawings; request the nozzle schedule from the seller if needed for tie-in design.

- Each unit carries its own Bilton serial number; serials provided at quote.