DUAL POLARITY TREATER (Future Grid Ready)

8’ (2348 mm) OD x 30’-0” (9144 mm) S/S MEC Treater

• Code ASME SECTION VIII, Div 1
• Design Factor 3.5
• Design Pressure: 517.1 kPag (75 PSIG)
• Design Temperature: 120ºC (248F)
• MDMT -29C (-20F)
• Corrosion Allowance 1.6mm (0.0625”)
• PWHT VesselInlet deflector
• Two (2) 18” OD x 17’ firetubes, 3.4 MMBTU/hr total duty (approximately 10000 BTU/hr/ft² heat flux)
• Firetube corrosion allowance is 1/16” at 75 PSIG design pressure
• Water outlet vortex breakers
• Front End degassing section
• Manual desludge system
• Internal distribution system including inlet distributor, spreaders and collector toughs.

12ft X 85ft Treater

Treater = 85' x 14' x 14'

Skid only = 107' x 23' x 8'

Fire tube removed for inspection.

CURRENTLY BEING RECONDITIONED

COATING IS GOOD

GRID IS STILL INTACT W/ NO LOOSE INSULATORS

ELECTRICAL
Package does not currently include final electrical wiring of the equipment, but
can provide this service as an option. 

MAJOR DETAILS

• One (1) 12’ (3658 mm) OD x 70’-0” (21336 mm) S/S Dual Polarity Treater
• Code ASME SECTION VIII, Div 1 2007 Edition 09 Addenda
• Design Factor 3.5
• Design Pressure: 517.1 kPag (75 PSIG)
• Design Temperature: 175ºC (347F)
• MDMT -29C (-20F)
• Corrosion Allowance 3.2mm (0.125”)
• Inlet deflector
• Two (2) firetubes, 8.6 MMBTU/hr total duty (approximately 10000 BTU/hr/ft² heat flux)
• Water outlet vortex breakers
• Front End degassing section
• Back end vertical flow coalescing section Dual Polarity Power Unit and Steel Grids c/w One (1) 100 kVa Dual Polarity Power Unit compete with ladder & access platform
• Manual desludge system
• Internal distribution system including inlet distributor, spreaders and collector toughs.

See attachements for more details