c/w 100bbl Tank

=====================

EQUIPMENT OVERVIEW

=====================

Condition
Overhaul Required

Manufactured
2003

Location
Slave Lake, Alberta

Registration:
Cooler and all vessels AB/BC/SK – except fuel gas scrubber is AB only.

Service:
Sour

Driver / Driven:
CAT 3512LE & Ariel JGE-4/3 with double distance pieces

Stages:
3

Cylinders & MAWP:
1st stage, 12.500”T x 2 @ 635psi;
2nd stage, 8.375” ET @ 800psi;
3rd stage, 5.500” [email protected] 1725psi

Package MAWP:
1650 psi

Control Panel:
PLC

Cooler Manufacturer:
Hemphill

Additional Notes:
Preserved; Fire eyes (x2); Gas detection (x2); H2S detection (x2); Exhaust fan; 3 ton crane; Cata-Dyne heaters; Inlet pressure control valve; Auto/manual recycle; Auto/manual louvers; AC lighting; Ridge vent & overhead door in building and a 3 piece main skid.

1 MW of Power, 1 Fixed Price, 8 Weeks & GO!

1 MW Generator Turnkey Solution Summary

As an alternative to buying this generator as-is, we’ve prepared and can execute a full turnkey cost-saving power generation solution. Watch the video included and review the turnkey summary below.

Virtual 3D Tour

Objective: Supplying, delivering, fully installing, and commissioning a 1 MW Waukesha 7042GL natural gas powered complete prime power generation system.

Costing: Project will be executed with total cost certainty rolled into one up-front fixed price of $842,000 + taxes (capital lease and rent-to-own available). Everything is included in the one price (project scope available upon request); from the cost of the generator, site work and all the way through to commissioning.

Project Timeline: 8-10 Weeks from today

GENERAL PACKAGE CONFIGURATION

Waukesha L7024GL

• VHP, 12 cylinder
• Rated 1472 HP – 1097 kW @ 1200 RPM
• Rated Continuous Service
• Fuel – Natural Gas

Propak Fin Tube Aerial Cooler Assembly

• Jacket water section
• After-cooler section
• Belt Driven Fan from Engine

KATO 1000 kW Generator Assembly

• 6P6-1900 1000Kw/1250 KVA
• 277/480/3/60 VAC
• 1504 Amps
• Rated Continuous Service

Thompson MEC-20 Micro Controller Panel

• Synchronous Generator/Engine Controller
• Woodward Governor Control
• Main Breaker
• Engine Monitoring Annunciator

Kohler 60 kW Black Start Unit

• Engine – John Deere 4045TF150C
• Fuel – Diesel
• Generator – Kohler 60REQZI
• 62 kW
• 277/480/3/60 Vac
• 71 Amps

Eagle Instrument Air Compressor

• Qty. 2 screw compressors
• Qty. 2 TECO 20 HP, 480/3/60 VAC motors
• 100 Gallon Storage tank
• Automated air dryer assembly

Building & Skid

• Length 40’
• Width 20’
• Height 22’
• Weight 100,000 lbs.
• Qty. 4 Lifting lugs on each side of the skid/building assembly.

Additional Cooler Dimensions

• Width 20’
• Length 10’
• Height 12’

Inquiries

Contact us to learn more about this exciting 1MW turnkey and fixed-cost solution.

=====================

EQUIPMENT OVERVIEW

=====================

Designed to work with 150HP Jet pump packages (sold separately), these separators are designed two phase, but the designers really had a fascination with level gauges, and as such you will have amazing optics on what is happening inside the vessel.  There are 5 available, 2 are new – 3 are used and in great condition still.  All of them are located in an easy access yard in Grande Prairie, Alberta for easy removal and transport to your site.

==================

360º VIRTUAL TOUR

==================

Explore this package in rich detail through a virtual walkthrough here:

https://my.matterport.com/show/?m=czduR3FeGUP

==========

DRAWINGS

==========

Drawings available upon request.

=========================

ADDITIONAL INFORMATION

=========================

Condition:

5 Currently Available –  2 NEW / 3 USED (less than 2 years)

Manufactured:

2012 by ES Fox

Location:

Grande Prairie, AB

Status:

Disconnected; in Yard

Registration:

U Stamp; AB/BC/SK CRN

Service:

Sour

Phases:

2 Phase

Electrical:

Used ones are wired to JB’s; New ones have no electrical installed

Shipping Dimension:

29’ 7” L x 12’ 4” W x 10’ 2” H

Package Comments:

Originally designed to work together with Weatherford W165 triplex jet pump packages

2009 Micafil type RTKK 245-1050/56

Immediately available 3 Coil tube trucks.

All extra parts, tooling, maintanance supplies and BOP will be included in price of purchase.

2002 Western Star Tri drive,  435 Caterpillar engine c/w 18 speed transmision

- 330 CFM compressor

- DA injector

- Holds 3000M of 1 1/4

- Coil type 3/4 - 1 1/4

-  C/W Knuckle picker

This unit will need some maintanance before being placed back into service.

2004 Peterbilt conventional Tandom tandom, Caterpillar C15 engine, 18 speed transmision.

- 660 CFM Hurricane compressor

- National injector T25

- Holds 3000 M of 1 1/2

- coil type 1 1/4-1 3/4

- C/W Knuckle picker.

Ready for service.

2007 Peterbilt conventional Tri drive, Caterpillar C15, 18 speed transmision.

- 660 CFM Hurricane compressor

- DA injectors

- holds 3000 M of 1 1/2

- Coil type 3/4 - 1 3/4

- C/W Knuckle picker.

Ready for service.

Generator model LSA 47.2 M8, 60HZ, 1800RPM, 406 KW, 508 KVA, 0.8 PF, 3 Phase, 480/277 Volts.   50HZ, 1500 RPM, 324 KW, 405 KVA, 0.8 PF, 3 Phase, 380/219, 400/231 and 415/240 Volts.